SATO M8485S Manual do Operador descarregar pdf (Página 43)

Calendar Set

If the Calendar Option is installed in the printer, the date and time can be set

manually using the LCD Display or via the <ESC>WT Calendar Set command (see

page 5-78). The last setting, set either manually via software command, received by

the printer will be the value used. The format of the display is YY/MM/DD hh:mm

(Year/Month/Day/hours:minutes). The date format is fixed and cannot be changed.

1. To enable the Calendar feature (if installed), press the LINE key until the underline

cursor is beneath the Y(es). If the Calendar feature is to be disabled, press the Line

key until the cursor is under the N(o). When the desired setting is selected, press the

FEED key to strp the display to the Calendar Set display.

1. Year - The first display shown will have the two digit year selection underlined. You

can scroll through the dates by pressing the LINE key. The year number will

increase by one each time the LINE key is pressed until it reaches its maximum

legal value (i.e., 99 for the year digits) at which point it will wrap around to the

00 setting.

2. Month - After you have set the correct year, pressing the FEED key will advance

the underline cursor to the two digit Month position. You can scroll through the

numbers corresponding to the month by pressing the LINE key. The month

number will increase by one each time the LINE key is pressed until it reaches a

value of 12 at which point it will wrap around to the 01 setting.

3. Day - After you have set the correct month, pressing the FEED key will advance the

underline cursor to the two digit Day position. You can scroll through the

numbers corresponding to the month date by pressing the LINE key. The date

number will increase by one each time the LINE key is pressed until it reaches a

value of 31 at which point it will wrap around to the 01 setting.

4. Hour - After you have set the correct day, pressing the FEED key will advance the

underline cursor to the two digit Hour position. You can scroll through the

numbers corresponding to the hour (using a 24 hour clock) by pressing the LINE

key. The hour number will increase by one each time the LINE key is pressed

until it reaches a value of 24 at which point it will wrap around to the 01 setting.

5. Minute- After you have set the correct hour, pressing the FEED key will advance

the underline cursor to the two digit Minute position. You can scroll through the

numbers corresponding to the hour by pressing the LINE key. The minute

number will increase by one each time the line key is pressed until it reaches a

value of 60 at which point it will wrap around to the 01 setting.

6. After you have set the minute, pressing the FEED key will accept the setting and

advance to the Ignore CR/LF display.

CALENDAR ENABLED

NO YES

CALENDAR

01/01/01 01:01

Section 3. Configuration

SATO “S” Print Engines 9001034 Rev E Page 3-15

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 227 228

Comentários a estes Manuais

Sem comentários

SATO M8485S Manual do Operador Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Impressoras de rótulos SATO M8485S