SATO M8485S Manual do Operador descarregar pdf (Página 36)

Print Speed Adjustment

There are three SPEED settings on the M-8490S/M-8460S and four on the

M-8485S/M-8459S. The setting is listed on the bottom line of the display. The

current setting is indicated by an underline under one of the speed settings. To

change the setting:

M-8459S M-8485S M-8460S/M-8490S

Print Speed

Setting

2 = 2 ips

3 = 3ips

4 = 4 ips

5 = 5 ips

4 = 4 ips

6 = 6 ips

8 = 8 ips

10 = 10 ips

4 = 4 ips

6 = 6 ips

8 = 8 ips

1. Use the LINE key to step the underline cursor to the desired speed setting.

2. Once the correct setting is underlined, press the FEED key to accept the setting and

advance to the next adjustment.

Note: This setting can be overriden by software (see Print Speed, page 5-58).

See Section 4: CLEANING AND MAINTENANCE, for additional information on how to

make this adjustment for optimum print quality.

Pitch Offset and Direction

The label Pitch is the distance from the leading edge (the edge that comes out of the

printer first) of a label and the leading edge of the next label. The leading edge

position of the label can be adjusted relative to the print head +/- 49 mm in

increments of 1 mm using the following procedure. Once the position is set, it can be

adjusted +/- 3.75mm using the PITCH potentiomenter on the Adjustment panel (see

page 3-19).

1. The underline cursor will be positioned underneath the Pitch Direction setting.

Pressing the LINE key will step the setting to the positive (+)/ negative (-)

selection. A positive selection moves the leading edge of the label forward (away

from the print mechanism) while a negative selection moves the leading edge of

the label back into the mechanism.

2. Once the correct setting is selected, pressing the FEED key will accept the setting

and advance to the Pitch Offset adjustment.

3. Use the LINE key to step the first digit of the counter to the desired position. The

display will increment one step for each time the LINE key is pressed. The

reading will advance to a setting of 4 after which it will automatically wrap and

PRINT SPEED

PITCH OFFSET

+00mm

Section 3. Configuration

Page 3-8 9001034 Rev E SATO “S” Print Engines

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 227 228

Comentários a estes Manuais

Sem comentários

SATO M8485S Manual do Operador Página 36

Comentários a estes Manuais

Manuais e produtos relacionados com Impressoras de rótulos SATO M8485S