SATO /gt Series Manual do Utilizador descarregar pdf (Página 21)

Compact Printers Evaluation Report

- Confidential - 19/27

SNMP

SNMP Config

NAME VALUE DEFAULT

VALUE

NOTE

Authentic community Default password

Specify the authentication community

name of SNMP. This community

name is authenticated when an

SNMP set request is received.

Trap community public

Specify the trap community of SNMP.

This community name is used when

the print server send a trap.

Trap address 0.0.0.0

Specify the destination IP address of

the SNMP trap. The value is a four-

part series of numbers separated by

decimal points, such as

"xxx.xxx.xxx.xxx". When the value is

"0.0.0.0"(default), this item is disabled

and a trap will not be generated in

any case.

SysContact

Specify the SysContact of the MIB-II

object. The email address of the

network administrator is used.

SysName

Specify the SysName of the MIB-II

object. The host name or domain

name of the print server is used.

SysLocation

Specify the SysLocation of the MIB-II

object. The location of the print server

is used.

Enable Authen Trap 2

Select whether to allow or disallow

the "EnableAuthenTrap" of the MIB-II

object. If a violation of the community

occurs "allow" is the setting, the

SNMP trap is sent to the IP address

specified in "TRAP Address".

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Comentários a estes Manuais

Sem comentários