SATO GL 4xxe Series Guia de Instalação

1 RFID KIT INSTALLATION GUIDE Read this Installation Guide before and during the installation of the above accessory. Keep this Installation Guide

10 Setting the Country Frequency When the RFID kit is installed, the printer will automatically be set to use the Country Frequency of the antennam

11

2 1 General 1.1 Important information This quick guide provides important information on how to setup your new SATO product. Be sure to read

3 1.3 Explanation of symbols This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explan

4 1.4 Contact and Document Information . Extensive contact information of worldwide SATO operations can be found on the Internet

5 Step Instructions & Tools Image(s) GL4xxe RFID KI

6 Removing the front cover Tool(s) required Flat blade screwdriver (recommended) 1. Loosen and remove the thumbscrew fastener that

7 2 Removing the Print Head 1. Release the print head assembly by turning the head lock latch counterclockwise. 2. Press the spring-loaded tab as

8 3 Installing the antenna Part(s) Required ANTENNA ASSY, RFID, SL4M SCREW, 6-19 HL X 1/2, PHCR, SS410, ANSI B18.6.4 Tool(s) required #1 Phillips

9 4 Assembling the Reader Module Parts required READER MOUNT SUBASSEMBLY, GL4xxe Tool(s) required #1 Phillips + screwdriver - 8 in. lb. 1. Plug